fAQ
-
VFD
-
What is VFD ?
Answer :
A VFD works mostly on cathodoluminescence principle, comparable to a cathode ray tube but at much lower voltages.
A phosphor-coated carbon cathode in each tube of a VFD is blasted by electrons produced by the cathode filament.
-
What can we know about VFD for pos system customer display ?
Answer :
These display devices combine the benefits of LEDs and LCDs. They provide the same brightness as LEDs but seem to be simpler to read, and they
-
are able to display numbers, words, or letters for customer display, which are also simple to read in both darkness and light environment in the point
-
-of-sale.
-
-
How long do vacuum fluorescent displays VFD last?
Answer :
The color scheme (which ultimately decides the existence of the phosphor) and display brightness make such a serious influence on the tube’s life
-
time, which may scope from as little as 1,500 hours for a vibrant red VFD to 30,000 hours for a more common green VFD.
-
Can I use any 2-Line display with POS?
-
Answer :
Yeah, 20-columns x 2-lines dot matrix in a wide viewing angle for VFD Pole Display can be optional for POS System Terminal.
LCM
What is customer display?
-
Answer :
The customer display is generally made of injection moulding process materials.Its primary colors are black in the application.
Customer displays can show 40 characters including 20 columns x 2 lines such as unit price, total, payment, change, and more.
It’s popular in department stores, supermarkets, convenience stores, restaurants, specialty stores, hospitals, airports, and train stations,
-
among other places.
What is LCM?
-
Answer :
The radio frequency card, also referred to as the non-contact IC card, is made up of an IC chip and an inferential antenna and is stored in a standard
-
PVC card. There aren’t any exposed parts on the chip or antenna. It is a relatively new technique that has appeared in the world over recent years.
-
It manages to combine RF identification technology and IC card reader techniques, bringing an end to the matter of passive (no power in the card)
-
and contact-free cards. A substantial development inside the field of equipment. The card is retained at a specific distance from the reader’s surface
-
(usually 5-10mm), as well as info is read and recorded through use of radio signal transmission.
-
MSR
-
MSR Fail
-
Answer :
- Check MSR Cable insert completely or change MSR.
- Reinstall Driver.
- Check MSR Board.
- Check Super I/O.
IPC Industry has confronted with mass production constraints due to the requirements of scalability and flexibility for meeting variety of market needs yet shaped the nature of the lack of economic scale. EPOS is in a sense considered as one of IPC applications leveraging the same design concepts and major key components, cannot but suffer from higher material cost and lower quality scenario that volume mass-production doesn’t usually agree with.
Along with the fast-growing demands of bill-less payment transactions, fiscal data acquisitions, self-service POS operation, and big data collection under omni-channel retail environments, to have low cost EPOS which provides higher production Cpk, turns out to be a much higher priority of key features of EPOS design and mass-production process. In other words, having common parts and common structure to reach the economic mass-production scale while keep the high scalability of flexibility becomes the major challenge for all EPOS manufacturers to cope with.
Not only survive, but glide over the key challenge, PLDM Technology provides permanent solution from the design, validation, engineering, tooling, quality control, all the way to mass-production, meaning that by partnering with PLDM, your EPOS products will be featured with high quality, low cost, high scalability, and still longevity to well adapt to the demanding market needs.
Principle
Our long-term goal is to be the best partner in the industry by being insightful, flexible, and quick to provide the appropriate solutions to our clients, and to be the embodiment of our spirit of service.
